Microcrystalline Wax #118P
Subject: Microcrystalline Wax #118PSolicitation Number: W911S227U0140Notice Type: SOLICITNAICS: 325998Set-Aside: Total Small BusinessNotice Published: 11-09-26Response Due: 11-23-26Agency: Department of the ArmyOffice: W6QM MICC-FT DRUMContact: Michelle Morgan This email address is being protected from spambots. You need JavaScript enabled to view it.Office Address: FORT DRUM, NY 13602-5220Place of Performance: Yuma Proving Ground301 C Street, Bldg. 3294Yuma, AZ 85365 85365
Click for official SAM (FBO) notice, additional information, and accompanying attachments
Minimum Specifications for Microcrystalline Wax #118P. (1) Wax Specifications: (a.) Melting point F/C, D 127 192 MIN 194-90 Penetration @77F/100F, D1321, 10 MAX 7,Color, ASTM D1500, 0.5 MAX, 1.05, Oil Content, WT%, D 721, 1.8 MAX, 0.5, Flash, PMF/C, D93, 500 MIN, 515/268 Viscosity, SUS, 210 F/98/9C, D2161, 90MIN, 99, Gravity,AP1, D 287, 34 MIN 36 MAX, 35, Odor, D 1833, 2 MAX, 1 Pound/Gallon AVG, D1250,7.076, Specific Gravity, 0.849. (b.) Wax must be in bead or flake form only. (2) Provide the manufacturer information of the wax. (3) Wax Packaging Requirements are as follows: (a.) 15 inches in length X 12 inches in width X 12 inches in height. (b.) Each box is not to exceed 50 lbs. (d.) No more than 40 boxed per pallet (2000 lbs.) (e.) Every box must be sealed. Within the box the wax is to be encased in a sealed anddurable plastic bag. SEE ATTACHED FOR COMPLETE SPEC REQUIREMENTS.