Allegheny National Forest - Bradford Ranger District-Mastication
Subject: Allegheny National Forest - Bradford Ranger District-MasticationSolicitation Number: 12444726Q0050Notice Type: SOLICITNAICS: 115310Set-Aside: Total Small BusinessNotice Published: 08-03-26Response Due: 08-17-26Agency: Department of AgricultureOffice: FOREST SERVICEContact: Laniece Nixon This email address is being protected from spambots. You need JavaScript enabled to view it.Office Address: Atlanta, GA 303092449Place of Performance: Bradford, PA 16701Related Notices:
Click for official SAM (FBO) notice, additional information, and accompanying attachments
Amendment 0001 for Solicitation 12444726Q0050 has been issued. Please note the following updates: The revised solicitation document, titled C05_Sol12444726Q0050_2026 BRD Mastication, is now attached. The Period of Performance has been added, and all changes are highlighted in yellow. ? No formal site visit will be conducted. ? A reminder that all quotes are due Monday, 17 August 2026, before 11:59 PM. The updated document will be posted under Attachments/Links. Please review the updated materials at your earliest convenience. ****************************************************************************************************************** This project involves manual and mechanical mastication of mountain laurel and other undesirable species under 6 inches DBH within designated areas of the Allegheny National Forest. Vegetation density varies, requiring contractors to assess on?the?ground conditions to determine where mechanized equipment can be used versus areas requiring manual treatment, such as intermittent stream buffers, dry drainages, and locations inaccessible to machinery. All treatment areas are reachable from forest roads unless an alternate route is approved in writing by the COR. Virtual unit boundaries are provided on georeferenced PDF maps, with shapefiles available upon request. Units will be marked with orange ?2026 Mastication? tags that contractors must locate, initial, and date prior to beginning work to confirm the correct unit. Please refer to the attachments for additional details."