Bulk Oil/Coolant Storage & Dispenser System
Subject: Bulk Oil/Coolant Storage & Dispenser SystemSolicitation Number: FA452826QSP03Notice Type: SOLICITNAICS: 332420Set-Aside: Total Small BusinessNotice Published: 07-28-26Response Due: 07-30-26Agency: Department of the Air ForceOffice: FA4528 5 CONSContact: Sherry L. Platt This email address is being protected from spambots. You need JavaScript enabled to view it. Ph: (701) 723-2139Office Address: MINOT AFB, ND 58705Place of Performance: Minot AFB, ND 58704Related Notices:
Click for official SAM (FBO) notice, additional information, and accompanying attachments
The Government is soliciting quotes for a modular fluid storage and dispensing system (delivery only) that meets the essential characteristics outlined in the attachments. The required system must fit within a 12?W x 9?D x 10?H footprint, operate entirely on facility compressed air, and secure four (4) 120-gallon aluminized steel tanks (3 Black for oil, 1 Blue for coolant). The system must accommodate three different types of oil and one coolant. Key functional requirements include: Two (2) pneumatic pumps: One AODD pump dedicated to the coolant line, and one Gear/Piston pump for the oil line. An oil selector manifold: The oil pump must draw from a manifold connecting the three oil tanks, utilizing three 2-way isolation ball valves to select the desired fluid and prevent cross-contamination. Two (2) 50ft hose reels: One reel dedicated to coolant and one shared reel for the three oil types. A mandatory purge/flush line: The oil hose reel system must include a purge line or return valve, equal in diameter to the hose, to clear the line of residual fluid when switching between oil types. Independent 10-micron filtration: Dedicated, independent 10-micron inline filters with isolation valves must be installed on both the oil and coolant lines. Safety features must include color-change desiccant breathers, isolated sight gauges, drip pans, and a spill containment pallet capable of holding a minimum of 130 gallons. Quotes for "or equal" products will be evaluated provided they meet all specified characteristics.